Mon-Fri, 8am-6pm

TYMPANOMETRY

Tymp 4000 series: German-Engineered Diagnostics

Tympanometer Tymp 4000-M (PC-based module)

Tymp 4000-M PC-diagnostic module it is able to do a full-automatic impedance measurement within a few seconds. Every function, as well as curves and data is presented at the PC monitor. The results can be verified before documenta-tion to avoid misprintings.

The device is used in the doctors practice as well as in the clinic. The measurement of the compliance lasts only two se-conds and works exellent used on children and restless patients. The test results are objective and independent from the assistance of the patient. Because of the extreme easy way to use, the examination can be made directly at the working place and fits in well into the general examination.

The test automatic enables to operate the Tymp 4000 with only one hand, so the head of the patient can be held steady with the other hand. For measurement the probe is held against the outer ear. A two coloured lamp on top of the hand-le indicates the correct fitting of the probe and the measurement is starting automatically. It is possible to measure the stapedius reflex ipsi- and contralateral. During this measurement, the middle ear pressure is held in the outer ear canal.

The data and measured curves can be stored on harddisc or transmitted to a practice software.

Tympanometer Tymp 4000 (standalone unit)

With the Tymp 4000 it is possible to do a full automatic impedance measurement within a few seconds. All functions, as well as curves and data are presented at a LCD-display. Herewith the results can be verified before documentation to avoid misprintings.

The device can be used in the doctors practice as well as in the clinic. Because the measurement of the compliance only takes two seconds, it is very suitable for children and restless patients. The test results are objective and independent from the assistance of the patient. Because of the extreme simple use, the examination can be done directly at the working place and fits in well in the general examination. Because of the test automatic a one-hand-operation is possible, so the head of the patient can be fixed with the other hand. For the measurement the probe is held against the outer ear. A two coloured lamp at the top of the handle indicates the correct fitting of the probe and the measurement is started automatically. It is possible to measure the stapedius reflex ipsi- and contralateral. During this measurement, the middle ear pressure is held in the outer ear canal

For printouts, an extreme fast digital printer, woking very noiseless and economical is used. All data and diagrams can be stored on a hard disk if the device is connected to a PC-system (optional).

Additional Tympanometry Information

Tympanometry

System: PC module with USB 2.0 interface:
Probetone: 226 Hz, 85 dB SPL
Pressure range: +200 to -400 daPa
Pressure delta: 300 daPa/sec
Measure time: 2 sec. for Compliance
Reflex tones: 500, 1000, 2000 and 4000 Hz at 85, 95 and 105 dB SPL
Reflex recognition: automatically
Reflexes: ipsi and contralateral
Pressurecalibration: automatically at start
State indication: LED 3-colours in probe, detailed display symbols
Dimensions: 330 x 80 x 265 mm (WxHxD)
Power supply: 13,2 V, external power supply 100-240 V, 50/60 Hz, 30 W
Accessories: probe with cable, 1 set ear plugs, headphone DD 45 C (option), probe holder, USB cable, power supply, Installations-CD, manual
This site is intended for healthcare professionals, and those working in the healthcare industry. By visiting this site, you agree to our terms of use. Terms of Use